LLC Transformer Magnetizing Inductance vs Leakage Inductance Explained

In an LLC resonant converter, magnetizing inductance Lm and resonant inductance Lr may both be implemented in one high-frequency transformer, but they do different jobs. Treating open-circuit primary inductance,…

Oct 11, 2026

SMD Gate Drive Transformer Supplier: 10 Checks Before You Order Samples

Package size and a 1:1 ratio are only screening filters when selecting an SMD gate drive transformer supplier. Reliable MOSFET, IGBT, or SiC gate drive depends on volt-second capability, magnetizing inductance, leakage…

Oct 8, 2026

Why a Gate Drive Transformer Cannot Hold a DC High Level: Volt-Second Balance and Core Reset

A gate drive transformer can isolate and transfer gate-drive pulses, but it cannot hold a DC high level indefinitely like a digital isolator. The turns ratio is not the limit. The core must receive alternating positive…

Sep 23, 2026

Why a 1:1 Gate Drive Transformer Can Still Distort the Gate Waveform

Learn why a 1:1 gate drive transformer can still cause amplitude loss, pulse droop, slow edges, and ringing—and how to troubleshoot magnetics and the gate loop.

Sep 20, 2026

Why Power Supply Engineers Don't Pay Attention to Transformer DCR (And Why They Should)

Transformer DCR is listed as "reference only" on most datasheets, but it quietly costs you 5-10% efficiency in high-current designs. When it matters, how to calculate the real cost, and how to spec it properly.

Aug 3, 2026

PoE Transformer Selection Guide: How to Choose the Right Magnetics for Your PoE Design

Learn how to select the right PoE transformer for your design. Covers IEEE 802.3af/at/bt power levels, flyback vs forward topology, core saturation, thermal management, and key parameters like DCR, turns ratio, and isolation voltage.

Jun 2, 2026