Gate Drive Transformer with Two Separate Secondary Windings for Half-Bridge Designs: What to Specify Before Ordering
Source a dual-secondary gate drive transformer for a half-bridge with a clear RFQ. Check winding polarity, volt-seconds, isolation, parasitics and sample tests.
Oct 30, 2026EFD Transformer Selection for Low-Profile Power Supplies
EFD transformer selection for low-profile supplies: check finished height, footprint, converter conditions, losses, winding, and insulation requirements.
Oct 26, 2026Gate Drive Transformer vs Digital Isolator: Which Isolation Path Fits Your Gate Driver
A gate drive transformer and a digital isolator are often drawn in the same place on a block diagram, between the controller and the power switch, and that is where the confusion starts. They do not do the same job. One…
Oct 26, 2026EFD15 PoE Flyback Transformer Supplier: An RFQ Checklist for Sourcing Samples
Sourcing an EFD15 PoE flyback transformer? Use this RFQ checklist to compare LPEMA catalog candidates, drawings, sample tests and application requirements.
Oct 22, 2026EFD Flyback Transformer Auxiliary Winding High at Light Load: Selection and Troubleshooting
Choosing an EFD flyback transformer? Diagnose high auxiliary-winding voltage at light load with load-matrix tests, ringing checks, and LPEMA sample criteria.
Oct 18, 2026EFD17 Multi-Output Flyback Transformer Pin Mapping for Compact Control Boards
An EFD17-class transformer can fit a height-constrained auxiliary power board, but matching the core family does not make two parts interchangeable. In a multi-output flyback transformer, pin mapping also controls…
Oct 15, 2026





